Material character

Designed to feel considered, not merely specified.

Travertine-look porcelain tile with a cross-cut vein pattern in a warm Scabas tone, also available as a 20mm outdoor paver for interior-to-exterior continuity.

Reviewed for coordinated use across the Aura Stone material palette.
Installed imagery and close-up product views support more confident selection.
Samples and live availability checks are available before final commitment.

Verified product information

Published specifications.

Product familyTiles

CollectionTrail

Available size12" x 24"

Thickness0.35" (9mm)

Coordinated paver12" x 12", 12" x 24", 24" x 24" · 0.8" (20mm) · Contact Aura for sourcing

Porcelain tile performance data

Technical information.

Indoor floors and walls in porcelain tile. Coordinated 20 mm outdoor pavers and porcelain veneer formats may also be available, with each format evaluated under its applicable standard.

Trail notes

Water absorption: ≤ 0.5% (ASTM C373) -- complies with ANSI A137.1 for tile; coordinated 20 mm pavers are evaluated under ANSI A137.3
DCOF / traction: Interior Wet (IW) rating for porcelain tile; coordinated outdoor pavers may carry Exterior Wet (EW), A+B+C / R11 classifications
Freeze / thaw: Resistant (ASTM C1026)
Thermal shock: Resistant (ASTM C484)
Breaking strength: 250 lbf or greater for tile (ASTM C648); coordinated 20 mm pavers may report 2,000 lbf breaking strength and 5,000 psi modulus of rupture under the stated paver test methods
Chemical resistance: Unaffected (ASTM C650)
Stain resistance: Unaffected (ASTM C1378)

Collection-specific notes are summarized from current manufacturer technical information. Product-specific reports are available by request when supplied by the manufacturer.

General porcelain tile performance reference for North American ANSI A137.1 testing.
Physical property	Test standard	Rectified	Non-rectified	Reported result
Water absorption	ASTM C373	< 0.5%	< 0.5%	Complies with ANSI A137.1
DCOF — dynamic coefficient of friction	ANSI A326.3	As reported	As reported	IW — Interior, Wet
Freeze / thaw cycling resistance	ASTM C1026	As reported	As reported	Resistant
Thermal shock resistance	ASTM C484	As reported	As reported	Resistant
Warpage — edge	ASTM C485	± 0.4% or ± 0.05 in	± 0.75% or ± 0.09 in	Complies with ANSI A137.1
Warpage — diagonal	ASTM C485	± 0.4% or ± 0.07 in	± 0.5% or ± 0.08 in	Complies with ANSI A137.1
Wedging	ASTM C502	± 0.25% or ± 0.03 in	± 0.5% or ± 0.08 in	Complies with ANSI A137.1
Chemical resistance	ASTM C650	As reported	As reported	Unaffected
Stain resistance	ASTM C1378	As reported	As reported	Unaffected
Breaking strength	ASTM C648	250 lbf or greater	250 lbf or greater	Complies with ANSI A137.1
Thickness variation	ASTM C499	Range: 0.04 in	Range: 0.04 in	Complies with ANSI A137.1

How to use this data: this is a general manufacturer performance reference for porcelain tile, primarily reflecting average production and matte-finish testing. It is not a product-specific certificate or a guarantee for every color, finish, caliber, lot, installation, or use condition.

Confirm the exact collection, finish, caliber, shade, lot, and intended application before ordering.
DCOF classifications do not make any tile slip-proof. Slope, drainage, contaminants, footwear, maintenance, grout joints, and site conditions affect traction.
Use tiles from the same caliber and production lot in visually continuous areas whenever possible.
Product-specific laboratory reports may be requested when a specification or commercial project requires documented values.
The selected product is Cross Cut Scabas; confirm current technical documentation for this exact selection and finish.

Installation & care

Protect the design through good planning.

Confirm substrate preparation, setting material, grout joint, movement joints, trim conditions, and wet-area requirements with the installer. Use compatible porcelain cleaners, remove grout residue promptly, and do not use hydrofluoric acid, waxes, sealers, or unapproved coatings.

Read the Product Use, Installation, Care & Safety Guide